产品-标准编号

当前位置:首页>产品-标准编号

BS EN 1730:2012 Furniture-Tables-Test methods for the determination of stability, strength and durab

时间:2020-10-21   访问量:4807
BS EN 1730:2012 Furniture-Tables-Test methods for the determination of stability,strength and durability
Edition: 20200206 更新 
SectionSection DescriptionSummary of important content重要内容摘要
NAForeword1. All test methods for seating used in European Standards for furniture have been collated in one document. The document now contains methods that were previously listed in EN 581-3, Outdoor furniture, EN 527-3, Office Work Tables and Desks and EN 15372, Non-domestic tables.
2. A durability test for tables with castors has been added.
3. A durability test for height adjustment mechanisms has been added.
1. 本标准汇集了欧洲家具标准中使用的所有座椅测试方法。该文件现在包含了之前在EN 581-3(户外家具)、EN 527-3(办公室工作台和桌子)、EN 15372(非住宅桌子)中列出的方法。
2. 增加了带有castors的桌子的耐久性测试。
3. 增加了高度调节装置的(桌子的)耐久性测试。
1ScopeNA 
2Normative referencesNA 
3Terms and definitionsNA 
4General test conditions1. The test for deflection of table tops (see 6.7), except those made from metal, glass and stone, shall be carried out at a relative humidity of (50 ± 5) % and a temperature of (23 ± 2)° C.
2. Unless otherwise stated, static forces shall be maintained for (10±2) s.
3. Unless otherwise stated, durability forces shall be maintained for(2±1)s;
1.除金属、玻璃和石头制成的台面外,对台面不平整度的测试(见6.7)应在相对湿度(50±5)%和温度(23±2)度的情况下进行。
2.除非另有说明,(强度测试时)静载力应维持(10±2)秒。
3.除非另有规定,耐久测试时,加载力应维持(2±1)秒。
5Test Equipment and Apparatus1. The equipment shall not inhibit deformation nor cause unnatural deformation of the unit/component, i.e. it shall be able to move so that it can follow the deformation of the unit/component during testing.
2. With the exception of the horizontal static, durability and stiffness tests, described in 6.2 and 6.4, all loading pads shall be capable of pivoting in relation to the direction of the applied force and the pivot point shall be as close as practically possible to the load surface.
3. Loading pads for the horizontal static, durability and stiffness tests, described in 6.2 and 6.4, shall not pivot.
4. With the exception of the horizontal static, durability and stiffness tests described in 6.2 and 6.4, if a loading pad tends to slide,use a slip resistant material between the loading pad and the surface being tested.
1. 测试设备不应抑制(被测试的样品)变形,也不应造成被测试的样品的非自然变形,即在测试过程中,设备应能够移动,以便跟踪被测试的样品的变形。
2. 除了6.2和6.4中所述的水平静载力、耐久性和强度测试外,所有的加载垫都应能够(在)相对于所施加的力的方向活动,且连接点应尽可能接近加载面。
3. 6.2和6.4中描述的用于水平静态、耐久性和强度测试的加载垫不得活动。
4. 除了6.2和6.4中描述的水平静态、耐久性和强度测试外,如果加载垫有滑动的倾向,可以在加载垫和被测试表面之间垫衬防滑材料。
SectionSection Description章节内容KW ModelKW Model Desc 产品名称产品图片资料下载操作视频
5Test Equipment and Apparatus (桌子)测试设备及仪器
5.1Vertical impactor(桌面)垂直冲击测试器KW-BSE-11-BSSeating Impacter欧标坐具冲击器

 
5.2Floor(桌子)测试平台KW-BSE-29Rubber Sheet for Furniture Drop Test欧标跌落测试地板 

 
5.3Stops(桌子)测试阻挡块KW-BSE-02Stopper挡块(厚度小于12毫米)

 
5.4Loading pad(桌子)加载垫KW-BSE-04-SPLocal Loading Pad - Universal普通加载垫-万向(加弹簧)

 
KW-BSE-04-NSLocal Loading Pad - fixed普通加载垫-非活动关节

  
5.5Foam家具加载垫衬海绵KW-BSE-08-2525mm PU Foam for Use with Seat Loading Pads25毫米坐具测试加载海绵衬垫

 
5.6Steel test tube(桌子)稳定性测试钢管KW-BSE-47Steel Tube for table stablity test桌子稳定性试验钢管


 
5.7Test    surface for castor durability tests(桌子)脚轮耐久测试平台///   
5.8Obstacles for castor durability tests(桌子)脚轮测试障碍物KW-BFM-17-FX-02Obstacles for EN caster testing欧标脚轮障碍物   
6Test Procedures - Strength and durability 测试程序 -(桌子的)结构强度和耐久性测试
6.2Horizontal static load    test(桌子)水平静载强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-67loading pad for EN table top static testing 欧标座面配重加载垫   
6.3Vertical static load tests(桌子)垂直静载强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
6.4Horizontal durability and stiffness test(桌子)水平摇晃耐久测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-67loading pad for EN table top static testing 欧标座面配重加载垫   
6.5Vertical durability test(桌面)垂直加载耐久测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-67loading pad for EN table top static testing 欧标座面配重加载垫   
6.6Vertical impact test(桌面)垂直冲击测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
6.7Deflection of table tops(静载状态下的)桌面表面变形量KW-BFM-04Standard sand bag标准重量砂袋

 
KW-GBF-08 平整度测定仪   
6.8Durability of tables with castors带脚轮的桌子的耐久测试NO 定制产品   
6.9Drop test桌面跌落测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-29Rubber Sheet for Furniture Drop Test欧标跌落测试地板    
7Test procedures – Stability 测试程序 - 稳定性
7.1GeneralNA///   
7.2Stability under vertical load 垂直载荷下稳定性测试///   
7.2.1General一般要求///   
7.2.2Test for tables that are or can be set to a height of 950 mm or less桌面高度小于或等于950毫米的桌子测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
7.2.3Test for tables that are or can be set to a height greater than 950 mm桌面高度大于950毫米的桌子测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
7.3Stability for tables with extension elements具有抽拉构件的桌子的稳定性KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-04 Standard sand bag标准重量砂袋

 
7.4Stability of tables designed to support a parasol用来撑伞的桌子的稳定性KW-BSE-47Steel Tube for table stablity test桌子稳定性试验钢管

 
8Test procedures - Height adjustment mechanisms 测试程序 - 机械调节桌面高度的桌子
8.1General一般要求///   
8.2Durability of Height adjustment mechanisms桌面高度可调的机械耐久性测试KW-BFM-04 Standard sand bag标准重量砂袋

 

上一篇:UL - 4041 Outline of Investigation for Outdoor Furniture

下一篇:GB/T 29525-2013 座椅升降气弹簧 技术条件

发表评论:

评论记录:

未查询到任何数据!

在线咨询

点击这里给我发消息 售前咨询专员

点击这里给我发消息 售后服务专员

在线咨询

免费通话

24小时免费咨询

请输入您的联系电话,座机请加区号

免费通话

微信扫一扫

微信联系
返回顶部